Bed bugs or eggs aren’t killed by a vacuum, so live bugs can get caught inside the tubes, on brushes, or in the canister.
The Vax Blade 4 is a cordless stick vacuum that’s at the lower end of the price spectrum.It performs decently for the price, making it a popular option for people who don’t want to spend a fortune on a Dyson or Miele cordless..
When hair becomes tangled around the brush bar, it can prevent the bristles from digging into carpet fibres.This reduces performance and makes your Vax less effective on carpets.. For this reason, it’s important to regularly remove caught fibres using the method outlined above.Here’s a quick recap:.
Always make sure the vacuum is switched off before performing any maintenance..Remove the floorhead from the vacuum.. Use a coin to unlock the brush bar and slide it out of the floorhead.. Run scissors along the groove in the brush bar and cut away tangled hair.. Use a dry cloth to wipe the inside of the floorhead.
Check for any blockages at the outlet.. Slide the brush bar back into position and return the end cap to a locked position.. We hope this article has helped you to remove hair from your Vax Blade’s brush bar.
If you have any questions, please let us know in the comments section below.Step 4: Clean The Direct-Drive Floorhead.
The floorhead is the only part of the V7 that’s in contact with the floor, so it’s not surprising that it’s also one of the dirtiest components.. Fortunately, Dyson has made the V7’s floorhead simple to take apart and clean.. Start by removing the floorhead from the wand.Then use a flat-head screwdriver (or a coin) to unlock and slide out the roller brush bar.. Cut away any hair or string that’s caught around the brush bar.
But be careful not to accidentally cut the brushes!.Use a damp cloth to clean debris and dirt from the exterior of the brush bar.. Use a flat-head screwdriver to remove the thin baseplate at the back of the floorhead.. Clean both the removed baseplate and the inside of the floorhead with a damp cloth..